Automatic LED Light Controller
LIGHT WHERE YOU NEED IT, WHEN YOU NEED IT!
Choose fully automatic, sensor-controlled stair lighting for your project. Let the lights turn on automatically when you enter the stairs and turn off behind you as you go. This will not only save energy, it will also ensure that you always have light where you need it, and when you need it.
Control Unit
A control unit is of course required.
The package includes: a control unit, sensors, sensor cables, and a power supply.
Profiles
Aluminum profiles are an optional accessory. However, it is more usual to choose using profiles to protect the LED strips and achieve a neat result.
Light Sources
Choose the number of LED strips suited to your staircase. For example – you may have 15 steps in your staircase, and then you choose 15 LED-strips. All strips can be cut every 5 cm.
Cable
We estimate that you will approximately need 50m of cable for a staircase with up to 16 steps.
THE AUTOMATIC LED LIGHT CONTROLLER PACKAGE CONTENTS:
- 1 Control Unit
- 6m Sensor Cables
- 2 IR Sensors
- 1 Power Supply
- 1 Manual
Enhanced Stairway Lighting Control for a Stunning Visual Experience
Our advanced control unit is specifically designed to operate stair lighting for staircases with up to 20 steps. With integrated motion sensors placed at both the top and bottom of the staircase, the unit automatically illuminates each step in sequence, following your path. This way, you’ll enjoy a seamless lighting effect, as each light gradually dims once you’ve passed, leaving an impressive, dynamic ambiance.
In standby mode, you have flexible options: keep the lights on at a subtle 20% brightness for gentle, ambient lighting, or opt for complete darkness until movement is detected. When you start using the stairs, the lights immediately brighten to 100% intensity, ensuring a well-lit path as you go. Additionally, you can connect a manual switch if you prefer hands-on control.
Developed specifically for the Norwegian market, this unit was created in collaboration with our trusted manufacturer to deliver quality and performance tailored to your needs.
Professional Installation Required
For your safety and to ensure proper functionality, this product must be installed by a registered installation company.
Easy Installation
A detailed user manual guides you step-by-step through the installation process. The system comes standard with a 24V power supply, and the control unit is pre-programmed and ready to use.
IR Sensors
These motion sensors operate without a reflector or a receiver sensor on the opposite side. The small, self-calibrating sensor can be installed on just one side of the staircase, at both the top and bottom of the stairs.
Performance
The control unit is compatible with power supplies from 10-24V, making it suitable for a variety of lighting points, including LED strips and LED spotlights. With a capacity of 500mA per output, the controller supports up to 6W per LED light.
Additional Lighting
If not all 20 channels on the controller are in use, you can allocate the remaining channels for auxiliary lighting (e.g., under the handrail or on the ceiling). These channels are permanently set to a dimmed light and gradually brighten when the sensor is activated.
Quality
The controller is designed, developed, and manufactured in Germany. Each unit undergoes thorough testing before reaching the market.
Standardized Design
The control unit is built to the DIN 43880 standard, allowing for flexible installation either on a wall or within a standard electrical cabinet.
Customizable Settings
With separate adjustment options, you can customize how long the lights stay on and how quickly they switch on and off.